Altivar 61 - error

[1.8 FAULT MANAGEMENT] (FLt-)
[THERMAL ALARM STOP] (SAt-)
Code
Description
SAt Terminal display: [Thermal alarm stop]
Logic address: 11021 = 16#2B0D Type: WORD (listing)
CANopen index: 2050/16 Read/write: R/WS
INTERBUS index: 5FBF/3E Factory setting: 0
DeviceNet path: 98/01/16
0=[No] (nO): Function inactive (in this case, the following parameters cannot be accessed)
1=[Yes] (YES): Freewheel stop on drive or motor thermal alarm
tHA Terminal display: [Drv therm. state al]
Logic address: 11009 = 16#2B01 Type: UINT
CANopen index: 2050/A Read/write: R/W
INTERBUS index: 5FBF/38 Unit 1%
DeviceNet path: 98/01/0A Factory setting: 100
Adjustment range
0to118
Thermal state threshold of the drive tripping the deferred stop
ttd Terminal display: [Motor therm. level]
Logic address: 11002 = 16#2AFA Type: UINT
CANopen index: 2050/3 Read/write: R/W
INTERBUS index: 5FBF/33 Unit 1%
DeviceNet path: 98/01/03 Factory setting: 100
Adjustment range
0to118
Thermal state threshold of the motor tripping the deferred stop
ttd2 Terminal display: [Motor2 therm. level]
Logic address: 11006 = 16#2AFE Type: UINT
CANopen index: 2050/7 Read/write: R/W
INTERBUS index: 5FBF/36 Unit 1%
DeviceNet path: 98/01/07 Factory setting: 100
Adjustment range
0to118
Thermal state threshold of the motor 2 tripping the deferred stop
ttd3 Terminal display: [Motor3 therm. level]
Logic address: 11007 = 16#2AFF Type: UINT
CANopen index: 2050/8 Read/write: R/W
INTERBUS index: 5FBF/37 Unit 1%
DeviceNet path: 98/01/08 Factory setting: 100
Adjustment range
0to118
Thermal state threshold of the motor 3 tripping the deferred stop
234