Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[REF. OPERATIONS] (OAI-)
Code
Description
SA2 Terminal display: [Summing ref. 2]
Logic address: 11801 = 16#2E19 Type: WORD (listing)
CANopen index: 2058/2 Read/write: R/WS
INTERBUS index: 5FBD/01 Factory setting: According to CFG (1)
DeviceNet path:
9C/01/02
Selection of a reference to be added to [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
0=[No] (nO): No source assigned
1=[AI1] (AI1): Analog input
2=[AI2] (AI2): Analog input
3=[AI3] (AI3): Analog input, if VW3A3202 extension card has been inserted
4=[AI4] (AI4): Analog input, if VW3A3202 extension card has been inserted
163 = [HMI] (LCC): Graphic display terminal
164 = [Modbus] (Mdb): Integrated Modbus
167 = [CANopen] (CAn): Integrated CANopen
169 = [Com. card] (nEt): Communication card (if inserted)
170 = [Prog. card] (APP): Controller Inside card (if inserted)
181 = [RP] (PI): Frequency input, if VW3A3202 extension card has been inserted
182 = [Encoder] (PG): Encoder input, if encoder card has been inserted
SA3 Terminal display: [Summing ref. 3]
Logic address: 11802 = 16#2E1A Type: WORD (listing)
CANopen index: 2058/3 Read/write: R/WS
INTERBUS index: 5FBD/02 Factory setting: 0
DeviceNet path:
9C/01/03
Selection of a reference to be added to [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Possible assignments are identical to [Summing ref. 2] (SA2) above.
dA2 Terminal display: [Subtract ref. 2]
Logic address: 11811 = 16#2E23 Type: WORD (listing)
CANopen index: 2058/C Read/write: R/WS
INTERBUS index: 5FBD/03 Factory setting: 0
DeviceNet path:
9C/01/0C
Selection of a reference to be subtraced from [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Possible assignments are identical to [Summing ref. 2] (SA2) above.
dA3 Terminal display: [Subtract ref. 3]
Logic address: 11812 = 16#2E24 Type: WORD (listing)
CANopen index: 2058/D Read/write: R/WS
INTERBUS index: 5FBD/04 Factory setting: 0
DeviceNet path:
9C/01/0D
Selection of a reference to be subtraced from [Ref.1 channel] (Fr1) or [Ref.1B channel] (Fr1b).
Possible assignments are identical to [Summing ref. 2] (SA2) above.
(1) According to CFG, see “CFG”, page 138.
If CFG = 1: Factory setting = 2
If CFG = 3: Factory setting = 2
Otherwise, factory setting = 0
188