Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[AUTO DC INJECTION] (AdC-)
Code
Description
AdC Terminal display: [Auto DC injection]
Logic address: 10401 = 16#28A1 Type: WORD (listing)
CANopen index: 204A/2 Read/write: R/W
INTERBUS index: 5FBF/2D Factory setting: 1
DeviceNet path: 95/01/02
0=[No] (nO): No injection
1=[Yes] (YES): Adjustable injection time
2=[Continuous] (Ct): Continuous standstill injection
tdC1 Terminal display: [Auto DC inj. time 1]
Logic address: 10402 = 16#28A2 Type: UINT
CANopen index: 204A/3 Read/write: R/W
INTERBUS index: 5FBF/2E Unit: 0.1 s
DeviceNet path: 95/01/03 Factory setting: 5
Standstill injection time.
SdC2 Terminal display: [Auto DC inj. level 2]
Adjustment range: 1 to 300
Logic address: 10405 = 16#28A5 Type: UINT
CANopen index: 204A/6 Read/write: R/W
INTERBUS index: 5FBF/31 Unit: 0.1 A
DeviceNet path: 95/01/06 Factory setting: 0.5 In (1)
2 nd level of standstill DC injection current.
tdC2 Terminal display: [Auto DC inj. time 2]
Adjustment range: 0 to 1.2 In (1)
Logic address: 10404 = 16#28A4 Type: UINT
CANopen index: 204A/5 Read/write: R/W
INTERBUS index: 5FBF/30 Unit: 0.1 s
DeviceNet path: 95/01/05 Factory setting: 0
2 nd standstill injection time.
Adjustment range: 0 to 300
(1) In corresponds to the rated drive current indicated in the installation manual and on the drive nameplate.
197