Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[LO4 CONFIGURATION] (LO4-)
Code
Description
LO4 Terminal display: [LO4 assignment]
Logic address: 5012 = 16#1394 Type: WORD (listing)
CANopen index: 2014/D Read/write: R/WS
INTERBUS index: 5FBC/6C Factory setting: 0
DeviceNet path:
7A/01/0D
Identical to r2, see “r2”, page 170.
LO4d Terminal display: [LO4 delay time]
Logic address: 4252 = 16#109C Type: UINT
CANopen index: 200C/35 Read/write: R/WS
INTERBUS index: 5FBC/33 Unit: 1ms
DeviceNet path: 76/01/35 Factory setting: 0
Adjustment range: 0 to 9999
The delay time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
LO4S Terminal display: [LO4 active at]
Logic address: 4212 = 16#1074 Type: WORD (listing)
CANopen index: 200C/D Read/write: R/WS
INTERBUS index: 5FBC/23 Factory setting: 0
DeviceNet path:
76/01/0D
Configuration of the operating logic:
0=[1] (POS): State 1 when the information is true
1=[0] (nEG): State 0 when the information is true
Configuration [1] (1) cannot be modified for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments.
LO4H Terminal display: [LO4 holding time]
Logic address: 4232 = 16#1088 Type: UINT
CANopen index: 200C/21 Read/write: R/WS
INTERBUS index: 5FBC/2B Unit: 1ms
DeviceNet path: 76/01/21 Factory setting: 0
Adjustment range: 0 to 9999
The holding time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
176