Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
Code
Description
PS8 Terminal display: [8 preset speeds]
Logic address: 11403 = 16#2C8B Type: WORD (listing)
CANopen index: 2054/4 Read/write: R/WS
INTERBUS index: 5FBC/F9 Factory setting: According to CFG and tCC (1)
DeviceNet path:
9A/01/04
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
To obtain 8 speeds you must also configure 2 and 4 speeds.
SP2 Terminal display: [Preset speed 2]
Logic address: 11410 = 16#2C92 Type: UINT
CANopen index: 2054/B Read/write: R/W
INTERBUS index: 5FBF/49 Unit: 0.1 Hz
DeviceNet path: 9A/01/0B Factory setting: 100
Adjustment range:
0 to 5000 or 10,000 according
to drive rating
SP3 Terminal display: [Preset speed 3]
Logic address: 11411 = 16#2C93 Type: UINT
CANopen index: 2054/C Read/write: R/W
INTERBUS index: 5FBF/4A Unit: 0.1 Hz
DeviceNet path: 9A/01/0C Factory setting: 150
Adjustment range:
0 to 5000 or 10,000 according
to drive rating
SP4 Terminal display: [Preset speed 4]
Logic address: 11412 = 16#2C94 Type: UINT
CANopen index: 2054/D Read/write: R/W
INTERBUS index: 5FBF/4B Unit: 0.1 Hz
DeviceNet path: 9A/01/0D Factory setting: 200
Adjustment range:
0 to 5000 or 10,000 according
to drive rating
(1) According to CFG, see “CFG”, page 138 and tCC, see “tCC”, page 157.
If CFG = 1 and tCC = 0: Factory setting = [LI5] (LI5)
If CFG = 1 and tCC = 1: Factory setting = [LI6] (LI6)
Otherwise, factory setting = 0.
200