Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[LI1 CONFIGURATION] (LI-)
Code
Description
L1d Terminal display: [LI1 On Delay]
Logic address: 4001 = 16#FA1 Type: UINT
CANopen index: 200A/2 Read/write: R/WS
INTERBUS index: 5FBC/0E Unit: 1ms
DeviceNet path: 75/01/02 Factory setting: 0
Adjustment range:
0to200
This parameter is used to take account of the change of the logic input to state 1 with a delay that can be adjusted between
0 and 200 milliseconds, in order to filter out possible interference. The change to state 0 is taken into account without delay.
[LIx CONFIGURATION] (L--)
All the logic inputs available on the drive are processed as in the example for LI1 above, up to LI6, LI10 or LI14, depending on whether or
not option cards have been inserted.
Tables indicating addresses for each of the Lxd parameters appear below.
Code L1d L2d L3d L4d L5d
Terminal display [LI1 On Delay] [LI2 On Delay] [LI3 On Delay] [LI4 On Delay] [LI5 On Delay]
Logic address: 4001 = 16#FA1 4002 = 16#FA2 4003 = 16#FA3 4004 = 16#FA4 4005 = 16#FA5
CANopen index: 200A/2 200A/3 200A/4 200A/5 200A/6
INTERBUS index: 5FBC/0E 5FBC/0F 5FBC/10 5FBC/11 5FBC/12
DeviceNet path: 75/01/02 75/01/03 75/01/04 75/01/05 75/01/06
Code L6d L7d L8d L9d L10d
Terminal display [LI6 On Delay] [LI7 On Delay] [LI8 On Delay] [LI9 On Delay] [LI10 On Delay]
Logic address: 4006 = 16#FA6 4007 = 16#FA7 4008 = 16#FA8 4009 = 16#FA9 4010 = 16#FAA
CANopen index: 200A/7 200A/8 200A/9 200A/A 200A/B
INTERBUS index: 5FBC/13 5FBC/14 5FBC/15 5FBC/16 5FBC/17
DeviceNet path: 75/01/07 75/01/08 75/01/09 75/01/0A 75/01/0B
Code L11d L12d L13d L14d
Terminal display [LI11 On Delay] [LI12 On Delay] [LI13 On Delay] [LI14 On Delay]
Logic address: 4011 = 16#FAB 4012 = 16#FAC 4013 = 16#FAD 4014 = 16#FAE
CANopen index: 200A/C 200A/D 200A/E 200A/F
INTERBUS index: 5FBC/18 5FBC/19 5FBC/1A 5FBC/1B
DeviceNet path: 75/01/0C 75/01/0D 75/01/0E 75/01/0F
158