Altivar 61 - error

[1.8 FAULT MANAGEMENT] (FLt-)
[DC INJECTION] (dCI-))
Code
Description
IdC Terminal display: [DC inject. level 1]
Logic address: 11210 = 16#2BCA Type: UINT
CANopen index: 2052/B Read/write: R/W
INTERBUS index: 5FBF/41 Unit: 0.11 A
DeviceNet path: 99/01/0B Factory setting: 0.164 In (1)
Adjustment range: 0.11 In (1) to 1.41 In (1)
Level of DC injection braking current activated via logic input or selected as stop mode.
tdI Terminal display: [DC injection time 1]
Logic address: 11213 = 16#2BCD Type: UINT
CANopen index: 2052/E Read/write: R/W
INTERBUS index: 5FBF/44 Unit: 0.11 s
DeviceNet path: 99/01/0E Factory setting: 5
Adjustment range: 1 to 300
Maximum current injection time [DC inject. level 1] (IdC)
IdC2 Terminal display: [DC inject. level 2]
Logic address: 11212 = 16#2BCC Type: UINT
CANopen index: 2052/D Read/write: R/W
INTERBUS index: 5FBF/43 Unit: 0.11 A
DeviceNet path: 99/01/0D Factory setting: 0.5 In (1)
Adjustment range: 0.1 In (1) to 1.41 In (1)
Injection current activated by logic input or selected as stop mode, once period of time [DC injection time 1] (tdI) has elapsed.
tdC Terminal display: [DC injection time 2]
Logic address: 11211 = 16#2BCB Type: UINT
CANopen index: 2052/C Read/write: R/W
INTERBUS index: 5FBF/42 Unit: 0.11 s
DeviceNet path: 99/01/0C Factory setting: 5
Adjustment range: 1 to 300
Maximum current injection time [DC inject. level 2] (IdC2)
(1) In corresponds to the rated drive current indicated in the installation manual and on the drive nameplate.
246