Altivar 61 - error

[1.6 COMMAND] (CtL-)
Code
Description
CCS Terminal display: [Cmd switching]
Logic address: 8421 = 16#20D1 Type: WORD (listing)
CANopen index: 2036/16 Read/write: R/WS
INTERBUS index: 5FBC/A7 Factory setting: 98
DeviceNet path:
8B/01/16
0=[No] (nO): Not assigned
98 = [ch1 active] (Cd1): No switching, [Cmd channel 1] (Cd1) active
99 = [ch2 active] (Cd2): No switching, [Cmd channel 2] (Cd2) active
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
• If the assigned input or bit is at 0, channel [Cmd channel 1] (Cd1) is active.
• If the assigned input or bit is at 1, channel [Cmd channel 2] (Cd2) is active.
Cd1 Terminal display: [Cmd channel 1]
Logic address: 8423 = 16#20E7 Type: WORD (listing)
CANopen index: 2036/18 Read/write: R/WS
INTERBUS index: 5FBC/A8 Factory setting: 1
DeviceNet path:
8B/01/18
1=[Terminals] (tEr): Terminals
3=[HMI] (LCC): Graphic display terminal
10 = [Modbus] (Mdb): Integrated Modbus
20 = [CANopen] (CAn): Integrated CANopen
30 = [Com. card] (nEt): Communication card (if inserted)
31 = [Prog. card] (APP): Controller Inside card (if inserted)
Cd2 Terminal display: [Cmd channel 2]
Logic address: 8424 = 16#20E8 Type: WORD (listing)
CANopen index: 2036/19 Read/write: R/WS
INTERBUS index: 5FBC/A9 Factory setting: 10
DeviceNet path:
8B/01/19
1=[Terminals] (tEr): Terminals
3=[HMI] (LCC): Graphic display terminal
10 = [Modbus] (Mdb): Integrated Modbus
20 = [CANopen] (CAn): Integrated CANopen
30 = [Com. card] (nEt): Communication card (if inserted)
31 = [Prog. card] (APP): Controller Inside card (if inserted)
183