Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[REFERENCE SWITCH.] (rEF-)
Code
Description
rCb Terminal display: [Ref 1B switching]
Logic address: 8412 = 16#20DC Type: WORD (listing)
CANopen index: 2036/D Read/write: R/WS
INTERBUS index: 5FBC/A3 Factory setting: 96
DeviceNet path:
8B/01/0D
0=[No] (nO): Not assigned
96 = [ch1 active] (Fr1): No switching, [Ref.1 channel] (Fr1) active
100 = [ch1B active] (Fr1b): No switching, [Ref.1B channel] (Fr1b) active
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
• If the assigned input or bit is at 0, [Ref.1 channel] (Fr1) is active.
• If the assigned input or bit is at 1[Ref.1B channel] (Fr1b) is active.
Fr1b Terminal display: [Ref.1B channel]
Logic address: 8415 = 16#20DF Type: Word (listing)
CANopen index: 2036/10 Read/write: R/WS
INTERBUS index: 5FBC/A6 Factory setting: 0
DeviceNet path:
8B/01/10
0=[No] (nO): Not assigned
1= [AI1] (AI1): Analog input
2=[AI2] (AI2): Analog input
3=[AI3] (AI3): Analog input, if VW3A3202 extension card has been inserted
4=[AI4] (AI4): Analog input, if VW3A3202 extension card has been inserted
163 = [HMI] (LCC): Graphic display terminal
164 = [Modbus] (Mdb): Integrated Modbus
167 = [CANopen] (CAn): Integrated CANopen
169 = [Com. card] (nEt): Communication card (if inserted)
170 = [Prog. card] (APP): Controller Inside card (if inserted)
181 = [RP] (PI): Frequency input, if VW3A3202 extension card has been inserted
182 = [Encoder] (PG): Encoder input, if encoder card has been inserted
187