Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
Code
Description
tAA Terminal display: [Torque ref. assign.]
Logic address: 9214 = 16#23FE Type: WORD (listing)
CANopen index: 203E/F Read/write: R/WS
INTERBUS index: 5FBC/B8 Factory setting: 0
DeviceNet path:
8F/01/0F
0=[No] (nO): Not assigned (zero torque reference)
1=[AI1] (AI1): Analog input
2=[AI2] (AI2): Analog input
3=[AI3] (AI3): Analog input, if VW3A3202 I/O card has been inserted
4=[AI4] (AI4): Analog input, if VW3A3202 I/O card has been inserted
181 = [RP] (PI): Frequency input, if VW3A3202 I/O card has been inserted
182 = [Encoder] (PG): Encoder input, if encoder card has been inserted
tLC Terminal display: [Analog limit. act.]
Logic address: 9213 = 16#23FD Type: WORD (listing)
CANopen index: 203E/E Read/write: R/WS
INTERBUS index: 5FBC/B7 Factory setting: 128
DeviceNet path:
8F/01/0E
128 = [Yes] (YES): The limitation depends on the input assigned by [Torque ref. assign.] (tAA).
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181
216