Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[R3 CONFIGURATION] (r3-)
Code
Description
r3 Terminal display: [R3 Assignment]
Logic address: 5003 = 16#138B Type: WORD (listing)
CANopen index: 2014/4 Read/write: R/WS
INTERBUS index: 5FBC/67 Factory setting: 0
DeviceNet path:
7A/01/04
Identical to r2, see “r2”, page 170.
r3d Terminal display: [R3 Delay time]
Logic address: 4243 = 16#1093 Type: UINT
CANopen index: 200C/2C Read/write: R/WS
INTERBUS index: 5FBC/2E Unit: 1ms
DeviceNet path: 76/01/2C Factory setting: 0
Adjustment range: 0 to 9999
The delay time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
r3S Terminal display: [R3 Active at]
Logic address: 4203 = 16#106B Type: WORD (listing)
CANopen index: 200C/4 Read/write: R/WS
INTERBUS index: 5FBC/1E Factory setting: 0
DeviceNet path: 76/01/04
Configuration of the operating logic:
0=[1] (POS): State 1 when the information is true
1=[0] (nEG): State 0 when the information is true
Configuration [1] (1) cannot be modified for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments.
r3H Terminal display: [R3 Holding time]
Logic address: 4223 = 16#107F Type: UINT
CANopen index: 200C/18 Read/write: R/WS
INTERBUS index: 5FBC/26 Unit: 1ms
DeviceNet path: 76/01/18 Factory setting: 0
Adjustment range: 0 to 9999
The holding time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
171