Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[RAMP] (rPt-)
Code
Description
rPt Terminal display: [Ramp type]
Logic address: 9004 = 16#232C Type: WORD (listing)
CANopen index: 203C/5 Read/write: R/W
INTERBUS index: 5FBC/B2 Factory setting: 0
DeviceNet path:
8E/01/05
0=[Linear] (LIn)
1=[S ramp] (S)
2=[U ramp] (U)
3=[Customized] (CUS)
Inr Terminal display: [Ramp increment]
Logic address: 9020 = 16#233C Type: WORD (listing)
CANopen index: 203C/15 Read/write: R/W
INTERBUS index: 5FBF/24 Factory setting: 1
DeviceNet path:
8E/01/15
0=[0.01] (0.01): Ramp up to 99.99 seconds
1=[0.1] (0.1): Ramp up to 999.9 seconds
2=[1] (1): Ramp up to 6000 seconds
ACC Terminal display: [Acceleration]
Logic address: 9001 = 16#2329 Type: UINT
CANopen index: 203C/2 Read/write: R/W
INTERBUS index: 5FBF/1C Unit: According to Inr (1)
DeviceNet path: 8E/01/02 Factory setting: 30
Time to accelerate from 0 to the [Rated motor freq.] (FrS), see “FrS”, page 143.
dEC Terminal display: [Deceleration]
Adjustment range: According to Inr (1)
Logic address: 9002 = 16#232A Type: UINT
CANopen index: 203C/3 Read/write: R/W
INTERBUS index: 5FBF/1D Unit: According to Inr (1)
DeviceNet path: 8E/01/03 Factory setting: 30
Time to decelerate from the [Rated motor freq.] (FrS) to 0, see “FrS”, page 143.
Adjustment range: According to Inr (1)
(1) According to Inr, see “Inr”, page 190.
If Inr = 0: Unit = 0.01 s, adjustment range = 1 to 9999
If Inr = 1: Unit = 0.1 s, adjustment range = 1 to 9999
If Inr = 2: Unit = 1 s, adjustment range = 1 to 6000
190