Altivar 61 - error

[1.3 SETTINGS] (SEt-)
Code
Description
LSP Terminal display: [Low speed]
Logic address: 3105 = 16#C21 Type: UINT
CANopen index: 2001/6 Read/write: R/W
INTERBUS index: 5FBF/04 Unit: 0.1 Hz
DeviceNet path: 70/01/6A Factory setting: 0
Adjustment range:
0toHSP
Motor frequency at min. reference
HSP Terminal display: [High speed]
Logic address: 3104 = 16#C20 Type: UINT
CANopen index: 2001/5 Read/write: R/W
INTERBUS index: 5FBF/03 Unit: 0.1 Hz
DeviceNet path: 70/01/69 Factory setting: According to bFr (1)
Adjustment range: LSP to 10,000
Motor frequency at max. reference
ItH Terminal display: [Mot. therm. current]
Logic address: 9622 = 16#2596 Type: UINT
CANopen index: 2042/17 Read/write: R/W
INTERBUS index: 5FC2/0D Unit: 0.1 A
DeviceNet path:
2A/01/0A
91/01/17
(1)
(2)
Factory setting:
According to drive rating
Adjustment range: 0.2 In to 1.5 In (2)
Motor thermal protection current
SFC Terminal display: [K speed loop filter]
Logic address: 9105 = 16#2391 Type: UINT
CANopen index: 203D/6 Read/write: R/W
INTERBUS index: 5FBF/27 Unit: 1
DeviceNet path: 8E/01/6A Factory setting: 0
Adjustment range:
0to100
Speed loop filter coefficient
SPG Terminal display: [Speed prop. gain]
Logic address: 9103 = 16#238F Type: UINT
CANopen index: 203D/4 Read/write: R/W
INTERBUS index: 5FBF/25 Unit: 1%
DeviceNet path: 8E/01/68 Factory setting: 40
Speed loop proportional gain
Adjustment range: 0 to 1000
(1) path standard ODVA. It can be used for explicit messaging. Do not use for the assignment of an assembly.
(2) path Altivar. Avoid using for explicit messaging if you want to garantee future interchangeability. Use This path for the assignment in
an assembly.
139