Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[JOG] (JOG-)
Code
Description
JOG Terminal display: [JOG]
Logic address: 11110 = 16#2B66 Type: WORD (listing)
CANopen index: 2051/B Read/write: R/WS
INTERBUS index: 5FBC/F1 Factory setting: According to CFG and tCC (1)
DeviceNet path:
98/01/6F
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
In I/O profile only:
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
The function is active when the assigned input or bit is at 1.
JGF Terminal display: [Jog frequency]
Logic address: 11111 = 16#2B67 Type: UINT
CANopen index: 2051/C Read/write: R/W
INTERBUS index: 5FBF/3F Unit: 0.1 Hz
DeviceNet path: 98/01/70 Factory setting: 100
Reference in jog operation
JGT Terminal display: [Jog delay]
Adjustment range: 0 to 100
Logic address: 11112 = 16#2B68 Type: UINT
CANopen index: 2051/D Read/write: R/W
INTERBUS index: 5FBF/40 Unit: 0.1 s
DeviceNet path: 98/01/71 Factory setting: 5
Anti-repeat delay between 2 consecutive jog operations.
Adjustment range: 0 to 20
(1) According to CFG, see “CFG”, page 138 and tCC, see “tCC”, page 157.
If CFG = 3 and tCC = 0: Factory setting = [LI3] (LI3)
If CFG = 3 and tCC = 1: Factory setting = [LI4] (LI4)
Otherwise, factory setting = 0.
198