Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
Code
Description
rPS Terminal display: [Ramp switching]
Logic address: 9010 = 16#2332 Type: WORD (listing)
CANopen index: 203C/B Read/write: R/WS
INTERBUS index: 5FBC/B3 Factory setting: 0
DeviceNet path:
8E/01/0B
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
• ACC and dEC are enabled when the assigned input or bit is at 0.
• AC2 and dE2 are enabled when the assigned input or bit is at 1.
AC2 Terminal display: [Acceleration 2]
Logic address: 9012 = 16#2334 Type: UINT
CANopen index: 203C/D Read/write: R/W
INTERBUS index: 5FBF/22 Unit: According to Inr (1)
DeviceNet path: 8E/01/0D Factory setting: 50
Time to accelerate from 0 to the [Rated motor freq.] (FrS).
dE2 Terminal display: [Deceleration 2]
Adjustment range: According to Inr (1)
Logic address: 9013 = 16#2335 Type: UINT
CANopen index: 203C/E Read/write: R/W
INTERBUS index: 5FBF/23 Unit: According to Inr (1)
DeviceNet path: 8E/01/0E Factory setting: 50
Time to decelerate from the [Rated motor freq.] (FrS) to 0.
Adjustment range: According to Inr (1)
(1) According to Inr, see “Inr”, page 190.
If Inr = 0: Unit = 0.01 s, adjustment range = 1 to 9999
If Inr = 1: Unit = 0.1 s, adjustment range = 1 to 9999
If Inr = 2: Unit = 1 s, adjustment range = 1 to 6000
192