Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
[+/-SPEED AROUND REF.] (SrE-)
Code
Description
USI Terminal display: [+ speed assignment]
Logic address: 11520 = 16#2D00 Type: WORD (listing)
CANopen index: 2055/15 Read/write: R/WS
INTERBUS index: 5FBC/FE Factory setting: 0
DeviceNet path:
9A/01/79
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
Function active if the assigned input or bit is at 1.
dSI Terminal display: [-Speed assignment]
Logic address: 11521 = 16#2D01 Type: WORD (listing)
CANopen index: 2055/16 Read/write: R/WS
INTERBUS index: 5FBC/FF Factory setting: 0
DeviceNet path:
9A/01/7A
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
Function active if the assigned input or bit is at 1.
SrP Terminal display: [+/-Speed limitation]
Logic address: 11505 = 16#2CF1 Type: UINT
CANopen index: 2055/6 Read/write: R/W
INTERBUS index: 5FBF/50 Unit: 1%
DeviceNet path: 9A/01/6A Factory setting: 10
Adjustment range: 0 to 50
This parameter limits the variation range with +/- speed as a % of the reference. The ramps used in this function are
[Acceleration 2] (AC2) and [Deceleration 2] (dE2).
203