Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[LO3 CONFIGURATION] (LO3-)
Code
Description
LO3 Terminal display: [LO3 assignment]
Logic address: 5011 = 16#1393 Type: WORD (listing)
CANopen index: 2014/C Read/write: R/WS
INTERBUS index: 5FBC/6B Factory setting: 0
DeviceNet path:
7A/01/0C
Identical to r2, see “r2”, page 170.
LO3d Terminal display: [LO3 delay time]
Logic address: 4251 = 16#109B Type: UINT
CANopen index: 200C/34 Read/write: R/WS
INTERBUS index: 5FBC/32 Unit: 1ms
DeviceNet path: 76/01/34 Factory setting: 0
Adjustment range: 0 to 9999
The delay time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
LO3S Terminal display: [LO3 active at]
Logic address: 4211 = 16#1073 Type: WORD (listing)
CANopen index: 200C/C Read/write: R/WS
INTERBUS index: 5FBC/22 Factory setting: 0
DeviceNet path:
76/01/0C
Configuration of the operating logic:
0=[1] (POS): State 1 when the information is true
1=[0] (nEG): State 0 when the information is true
Configuration [1] (1) cannot be modified for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments.
LO3H Terminal display: [LO3 holding time]
Logic address: 4231 = 16#1087 Type: UINT
CANopen index: 200C/20 Read/write: R/WS
INTERBUS index: 5FBC/2A Unit: 1ms
DeviceNet path: 76/01/20 Factory setting: 0
Adjustment range: 0 to 9999
The holding time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
175