Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[R4 CONFIGURATION] (r4-)
Code
Description
r4 Terminal display: [R4 Assignment]
Logic address: 5004 = 16#138C Type: WORD (listing)
CANopen index: 2014/5 Read/write: R/WS
INTERBUS index: 5FBC/68 Factory setting: 0
DeviceNet path:
7A/01/05
Identical to r2, see “r2”, page 170.
r4d Terminal display: [R4 Delay time]
Logic address: 4244 = 16#1094 Type: UINT
CANopen index: 200C/2D Read/write: R/WS
INTERBUS index: 5FBC/2F Unit: 1ms
DeviceNet path: 76/01/2D Factory setting: 0
Adjustment range: 0 to 9999
The delay time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
r4S Terminal display: [R4 Active at]
Logic address: 4204 = 16#106C Type: WORD (listing)
CANopen index: 200C/5 Read/write: R/WS
INTERBUS index: 5FBC/1F Factory setting: 0
DeviceNet path: 76/01/05
Configuration of the operating logic:
0=[1] (POS): State 1 when the information is true
1=[0] (nEG): State 0 when the information is true
Configuration [1] (1) cannot be modified for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments.
r4H Terminal display: [R4 Holding time]
Logic address: 4224 = 16#1080 Type: UINT
CANopen index: 200C/19 Read/write: R/WS
INTERBUS index: 5FBC/27 Unit: 1ms
DeviceNet path: 76/01/19 Factory setting: 0
Adjustment range: 0 to 9999
The holding time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
172