Altivar 61 - error

[1.8 FAULT MANAGEMENT] (FLt-)
[DB RES. PROTECTION] (brP-)
Code
Description
brO Terminal display: [DB res. protection]
Logic address: 14111 = 16#371F Type: WORD (listing)
CANopen index: 206F/C Read/write: R/WS
INTERBUS index: 5FBD/60 Factory setting: 0
DeviceNet path:
A7/01/70
0=[No] (nO): No braking resistor protection (thereby preventing access to the other function parameters)
1=[Alarm] (ALrM): The alarm may be assigned to a logic output or a relay, see “r1”, page 168.
2=[Fault] (FLt): Switch to fault (bOF) with locking of drive (freewheel stop).
brP Terminal display: [DB Resistor Power]
Logic address: 14112 = 16#3720 Type: UINT
CANopen index: 206F/D Read/write: R/W
INTERBUS index: 5FBD/61 Unit: 0.11 kW
DeviceNet path: A7/01/71 Factory setting: 1
Rated power of the resistor used
brU Terminal display: [DB Resistor value]
Adjustment range: 1 to 10,000
Logic address: 14113 = 16#3721 Type: UINT
CANopen index: 206F/E Read/write: R/W
INTERBUS index: 5FBD/62 Unit: 0.11 Ω
DeviceNet path: A7/01/72 Factory setting: 1
Rated value of the braking resistor in Ohms
Adjustment range: 1 to 2000
243