Altivar 61 - error

[1.7 APPLICATION FUNCT.] (FUn-)
Code
Description
dCF Terminal display: [Ramp divider]
Logic address: 11230 = 16#2BDE Type: UINT
CANopen index: 2052/1F Read/write: R/W
INTERBUS index: 5FBC/F6 Unit: 1
DeviceNet path: 99/01/1F Factory setting: 4
Adjustment range: 0 to 10
The ramp that is enabled (dEC or dE2) is then divided by this coefficient when stop requests are sent.
dCI Terminal display: [DC injection assign.]
Logic address: 11203 = 16#2BC3 Type: WORD (listing)
CANopen index: 2052/4 Read/write: R/WS
INTERBUS index: 5FBC/F4 Factory setting: 0
DeviceNet path: 99/01/04
0=[No] (nO): Not assigned
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
160 = [CD00] (Cd00)
:
175 = [CD15] (Cd15)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
IdC Terminal display: [DC inject. level 1]
Logic address: 11210 = 16#2BCA Type: UINT
CANopen index: 2052/B Read/write: R/W
INTERBUS index: 5FBF/41 Unit: 0.1 A
DeviceNet path: 99/01/0B Factory setting: 0.64 In (1)
Adjustment range: 0.1 In to 1.41 In (1)
Level of DC injection braking current activated via logic input or selected as stop mode.
tdI Terminal display: [DC injection time 1]
Logic address: 11213 = 16#2BCD Type: UINT
CANopen index: 2052/E Read/write: R/W
INTERBUS index: 5FBF/44 Unit: 0.1 s
DeviceNet path: 99/01/0E Factory setting: 5
Maximum current injection time [DC inject. level 1] (IdC)
Adjustment range: 1 to 300
(1) In corresponds to the rated drive current indicated in the installation manual and on the drive nameplate.
195