Altivar 61 - error

[1.6 COMMAND] (CtL-)
Code
Description
rFC Terminal display: [Ref. 2 switching]
Logic address: 8411 = 16#20DB Type: WORD (listing)
CANopen index: 2036/C Read/write: R/WS
INTERBUS index: 5FBC/A2 Factory setting: According to CFG and tCC (1)
DeviceNet path:
8B/01/0C
0=[No] (nO): Not assigned
96 = [ch1 active] (Fr1): No switching, [Ref.1 channel] (Fr1) active
97 = [ch2 active] (Fr2): No switching, [Ref.2 channel] (Fr2) active
129 = [LI1] (LI1)
:
142 = [LI14] (LI14)
177 = [C101] (C101)
:
239 = [C415] (C415)
See: “Assignment conditions for logic inputs and control bits”, page 181.
• If the assigned input or bit is at 0, [Ref.1 channel] (Fr1) is active.
• If the assigned input or bit is at 1, channel [Ref.2 channel] (Fr2) is active.
Fr2 Terminal display: [Ref.2 channel]
Logic address: 8414 = 16#20DE Type: WORD (listing)
CANopen index: 2036/F Read/write: R/WS
INTERBUS index: 5FBC/A5 Factory setting: According to CFG (2)
DeviceNet path:
8B/01/0F
0=[No] (nO): Not assigned
1=[AI1] (AI1): Analog input
2=[AI2] (AI2): Analog input
3=[AI3] (AI3): Analog input, if VW3A3202 extension card has been inserted
4=[AI4] (AI4): Analog input, if VW3A3202 extension card has been inserted
160 = [+/- speed] (UPdt): +/- speed command
163 = [HMI] (LCC): Graphic display terminal
164 = [Modbus] (Mdb): Integrated Modbus
167 = [CANopen] (CAn): Integrated CANopen
169 = [Com. card] (nEt): Communication card (if inserted)
170 = [Prog. card] (APP): Controller Inside card (if inserted)
181 = [RP] (PI): Frequency input, if VW3A3202 extension card has been inserted
182 = [Encoder] (PG): Encoder input, if encoder card has been inserted
COP Terminal display: [Copy channel 1 2]
Logic address: 8402 = 16#20D2 Type: WORD (listing)
CANopen index: 2036/3 Read/write: R/WS
INTERBUS index: 5FBC/A0 Factory setting: 0
DeviceNet path:
8B/01/03
0=[No] (nO): No copy
1=[Reference] (SP): Copy reference
2=[Command] (Cd): Copy command
3=[Cmd + ref.] (ALL): Copy command and reference
(1) According to CFG, see “CFG”, page 138 and tCC, see “tCC”, page 157.
If CFG = 5 and tCC = 0, factory setting = [LI3] (LI3)
If CFG = 5 and tCC = 1, factory setting = [LI4] (LI4)
Otherwise, factory setting = 96
(2) According to CFG, see “CFG”, page 138.
If CFG = 5, factory setting = 1
Otherwise, factory setting = 0
184