Altivar 61 - error

[1.8 FAULT MANAGEMENT] (FLt-)
[TORQUE OR I LIM. DETECT.] (tId-)
Code
Description
SSb Terminal display: [Trq/I limit. stop]
Logic address: 9240 =16#2418 Type: WORD (listing)
CANopen index: 203E/29 Read/write: R/WS
INTERBUS index: 5FBC/B9 Factory setting: 0
DeviceNet path:
8F/01/29
0=[Ignore] (nO): Fault ignored
1=[Freewheel] (YES): Freewheel stop
2=[Per STT] (Stt): Stop according to configuration of [Type of stop] (Stt), see “Stt”, page 194.
4=[fallback spd] (LFF): Change to fallback speed, maintained as long as the fault persists and the run command
has not been removed.
5=[Spd maint.] (rLS): The drive maintains the speed at the time the fault occurred, as long as the fault persists and
the run command has not been removed.
6=[Ramp stop] (rMP): Stop on ramp
7=[Fast stop] (FSt): Fast stop
8=[DC injection] (dCI): DC injection stop
StO Terminal display: [Trq/I limit. time out]
Logic address: 9241 =16#2419 Type: UINT
CANopen index: 203E/2A Read/write: R/W
INTERBUS index: 5FBF/2C Unit: 1ms
DeviceNet path: 8F/01/2A Factory setting: 1000
Time delay for taking SSF "Limitation" fault into account
Adjustment range: 0 to 9999
242