Altivar 61 - error

[1.5 INPUTS / OUTPUTS CFG] (I-O-)
[LO2 CONFIGURATION] (LO2-)
Code
Description
LO2 Terminal display: [LO2 assignment]
Logic address: 5010 = 16#1392 Type: WORD (listing)
CANopen index: 2014/B Read/write: R/WS
INTERBUS index: 5FBC/6A Factory setting: 0
DeviceNet path:
7A/01/0B
Identical to r2, see “r2”, page 170.
LO2d Terminal display: [LO2 delay time]
Logic address: 4250 = 16#109A Type: UINT
CANopen index: 200C/33 Read/write: R/WS
INTERBUS index: 5FBC/31 Unit: 1ms
DeviceNet path: 76/01/33 Factory setting: 0
Adjustment range: 0 to 9999
The delay time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
LO2S Terminal display: [LO2 active at]
Logic address: 4210 = 16#1072 Type: WORD (listing)
CANopen index: 200C/B Read/write: R/WS
INTERBUS index: 5FBC/21 Factory setting: 0
DeviceNet path:
76/01/0B
Configuration of the operating logic:
0=[1] (POS): State 1 when the information is true
1=[0] (nEG): State 0 when the information is true
Configuration [1] (1) cannot be modified for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments.
LO2H Terminal display: [LO2 holding time]
Logic address: 4230 = 16#1086 Type: UINT
CANopen index: 200C/1F Read/write: R/WS
INTERBUS index: 5FBC/29 Unit: 1ms
DeviceNet path: 76/01/1F Factory setting: 0
Adjustment range: 0 to 9999
The holding time cannot be set for the [No drive flt] (FLt), [Brk control] (bLC) and [Input cont.] (LCC) assignments and remains
at 0.
174