model 2704 controller installation and operation handbook - Soliton

2704 Controller Programmer Operation
7. Press to select
‘Segment Type’
To select a different
Segment Type:.
Press
again
Press or to change
the Segment Type
The choices are:
.
Profile - for Ramp/Dwell/Step
End Segment
Go Back - to repeat
segments of a program (not
segment 1)
8. Press to select
‘PSP1 Type’
To set PSP1 Type to Ramp:
9. Press to select
‘PSP1 Type’
10. Press or to
select ‘Ramp’
When a parameter value is
selected to be altered it is
underlined with a flashing
cursor.
Select:-
Ramp to ramp the setpoint
up or down
Dwell to dwell
Step to jump from the
current setpoint to a new
target
11. Press to select
‘PSP1 Target’
12. Press or to
adjust the value
When a parameter value is
highlighted with a
continuous bar use or
to scroll the previous
or next parameter.
When it is underlined with
a flashing cursor, use
to scroll to the next
parameter
The setpoint will ramp to
600 units
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 6-25