model 2704 controller installation and operation handbook - Soliton

2704 Controller Digital Programmer
6A.1.1.
To Edit The Digital Programmer
Do This
1. From any display press
to access the page
header menu.
This Is The Display You
Should See
Additional Notes
2. Press or to
select ‘DIGITAL PROG’
3. Press to show subheaders
4. Press or to
select ‘Edit Program’
5. Press to show the list
of parameters
6. Press again to select
‘Prog Select’
Up to four programs can
be chosen
7. Press or to
change the program
number if required
8. Press to select ‘On
1’
9. Press or to
increase or decrease the
on time for the first output
in the sequence
10. Repeat for the eight On
and Off periods which
make up the sequence
Tip -
To enter a large time
period press and
together. This will
underline the mins and
hours sections
independently each time
the button is pressed.
The hours/mins can then
be raised or lowered using
or
The full list of parameters
is shown in the following
table
…
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 6A-3