model 2704 controller installation and operation handbook - Soliton

Module IO
2704 Controller
Table Number:
18.3.11.
This page allows you to set the parameters for
Channel C of a Dual PV Input module.
This module can only be fitted in slots 3 or 6.
MODULE IO
(Module 3(C)
Page)
Parameter Name Parameter Description Value Default Access
Level
This module has two inputs. Parameters are displayed under ‘channel’ (A) and ‘channel’ (C)
Channel A is the high level input, channel C is the low level input. This table shows Module
3 (or 6)C parameters
Ident Low Level Input R/O
Electrical Lo Electrical low input level Input range L3.
Electrical Hi Electrical high input level units as
configured
Eng Value Lo Low display reading Display range ‘To
Scale
Eng Value Hi High display reading Display range the PV
Input’
Filter Time Input filter time Off to
0:10:00.0
L3
Emissivity
Electrical Val
Module 3A Val
Emissivity
Pyrometer input only
The current electrical
value of the input
The current value in
engineering units.
Module 3A can be a user
defined name.
Off to 1.00
Input range units
as configured
Offset Transducer scale offset Range limits
CJC Temp
SBrk Trip Imp
Temperature read at the
rear terminals o C
Thermocouple inputs only
Current sensor break
value
Read as a % of the SBrk
Impedance configured
Channel Name Channel name Default
Text
See
L3
R/O
R/O
R/O
R/O
R/O
18-14 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00