model 2704 controller installation and operation handbook - Soliton

Module IO
2704 Controller
18.3. MODULE IO PARAMETERS
To view and alter parameters associated with each module:-
Do This
1. From the MODULE IO
sub-header display press
or to choose the
required module
This Is The Display You
Should See
Additional Notes
If a module is not fitted in
the selected position the
sub header is not
displayed
(A), (B), (C ) refer to the
output channel of a
single, dual or triple
module respectively
2. Press to show the list
of parameters for the
selected module
If the channel is not used the
message ‘No Parameters’ is
displayed
3. Press again to select
the first parameter
4. Press again to scroll
to a parameter which you
wish to change
5. Press or to
change its value
The following tables show
the parameters available
for different module types
…
18-4 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00