model 2704 controller installation and operation handbook - Soliton

2704 Controller Programmer Operation
6.5. PROGRAMMER PAGES
There are three pages associated with Programmer Operation. These are:-
1. PROGRAM MIMIC. This shows a trend plot of a running program
2. PROGRAM RUN. This shows a list of parameters associated with a running program
3. PROGRAM EDIT. This allows programs to be set up and edited
The Navigation Diagram, section 3.12, shows where these screens are found.
6.5.1. To Access the Program Trend Screen
Do This
1. From any display press
to access the page
header menu.
This Is The Display You
Should See
Additional Notes
2. Press or to
select ‘PROGRAM
MIMIC’
3. Press to display the
mimic view.
Segment No/Total
number of segments -
Customised Name
Prog No:
Customised Name
The mimic plots the
working SP for each PSP
configured.
S01/04
1372
600
-200
Prog No: Customised Name
Controller
Range
Current
Time
Current
SP
5. Parameters are shown at
the bottom of the screen
which show the segment
values.
Press to select each
parameter in turn.
The full list of parameters is shown in the following table
…
The value of a parameter
prefixed by ! can be
changed using or
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 6-11