model 2704 controller installation and operation handbook - Soliton

2704 Controller Programmer Operation
CourseHbk PSP2 Range displayed if HBk
Type _ Off
PSP3 Hbk
Type
PSP3
FineHbk
PSP3
CourseHbk
PSP3 Hbk
Value
Hot Start
PSP
Rate Units
Prog Cycles
End Action
Program
Name
Holdback type for PSP3
These are deviation
values between setpoint
and process value.
Fine and course holdback
allows two levels of
holdback to be applied to
different segments.
Fine holdback value for
PSP3
Course holdback value for
PSP3
Holdback value for PSP3
Allows hot start to be
applied to each PSP.
See also 6.3.5.
Rate units for a Ramp
Rate Programmer
Sets the number of times
the complete program is
executed.
Defines the action in the
end segment.
Dwell - the program will
dwell indefinitely at the
conditions set in the end
segment.
Reset - the program will
reset to the start
conditions.
Allows a user defined
name to be given to the
program number
Off
Fine Lo
Fine Hi
Fine Band
Course Lo
Course Hi
Course Bnd
Display
Range
Display
Range
SP1 hi limit
to
SP1 lo limit
None
PSP1
PSP2
PSP3
Per Second
Per Minute
Per Hour
Continuous
to 999
Dwell
Reset
User string
Off
L1
0 L3. Only
displayed if HBk
Type _ Off
0 L3. Only
displayed if HBk
Type _ Off
0 L3
None
Continuous
L3. Only
appears if Hot
Start option has
been enabled in
config level.
L3. Only
displayed if the
programmer is
Ramp Rate
L1
L1
L1
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 6-19