model 2704 controller installation and operation handbook - Soliton

2704 Controller Module IO
18.2. MODULE IDENTIFICATION
The first page which appears under the heading Module IO shows the type of module fitted in
each slot position.
Do This
This Is The Display You
Should See
Additional Notes
1. From any display press
as many times as necessary
to access the page header
menu
2. Press or to select
‘Module IO’
3. Press to show Subheaders
4. Press or to select
‘Idents’ (if necessary)
5. Press to show the list
of modules.
6. Press again to select
the module
If a module is fitted in any
module position, it’s type,
as listed in Table 18-1, is
displayed.
No Module is displayed if
the slot is empty.
This is a read only
display.
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 18-3