model 2704 controller installation and operation handbook - Soliton

Totaliser, Timer. Clock, Counter Operation
2704 Controller
12.3. TIMER BLOCKS
To set the time on one of the four timer blocks:-
Do This
1. From any display press
as many times as necessary
to access the page header
menu
This Is The Display You
Should See
Additional Notes
2. Press or to select
‘TIMER BLOCKS’
3. Press to show Subheaders
4. Press or to
select ‘Timer 1 (to 4)’
5. Press to show the
Parameter List
6. Press again to select
‘Time’
7. Press or to set
the time period
12.3.1. Timer Parameters
Displays and allows the
time period to be set in
Timer block 1
The following table gives
the full list of parameters
available under this list
header
…
Table Number:
12.2.1.
This page allows you to set up Timer
Parameters
TIMER BLOCKS
(Timer 1 to 4 Page)
Parameter Name Parameter Description Value Defaul
t
Time Timer Time 0:00:00.0 L1
Input
Trigger/Gate input. Turn On
to start timing
Off
On
Triggered Timer triggered (timing) Off
On
Output
Timer output. Occurs when
the timer has timed out
Elapsed Time Timer elapsed time 0:00:00.0 R/O
Off
On
Off
Off
L1
Access
Level
R/O
L1
12-8 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00