model 2704 controller installation and operation handbook - Soliton

Programmer Operation
2704 Controller
6.8.7. To Set Up Segment Names
Every segment can be given a name. The name is called up from ‘User Text’ and is
displayed on the programmer mimic diagram. User Text is set up in configuration level as
explained in 2700 Engineering Manual Part No. HA026502.
To select segment names:-
Do This
This Is The Display You
Should See
Additional Notes
1. Select the PROGRAM EDIT
(Segment) page header
2. Press to show
parameters
3. Press again to select
‘Program Number’
4. Press or to select
the number of the program
5. Press to scroll to
‘Segment Number’
6. Press or to
select the segment to be
named
7. Press to scroll to
‘Segment Name’
8. Press or to
select the required text
from the User Text list
Default Text will display
the segment number only
on the programmer
mimic.
Other choices are:-
01:Usr 1 to 50:Usr 50.
This gives up to 50 user
defined names.
6-34 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00