model 2704 controller installation and operation handbook - Soliton

Getting Started 2704 Controller
Working Output Power (from the active loop)
Main PV
Main SP
Override PV
Override SP
This line may show different parameters
Press to show alternatives. The defaults are:
Target SP The main setpoint Press
Target OP Output demand
VPos
Valve position (VP controller
only)
OvrSP Override setpoint . or
Disable OVR Allows override to be turned off
eg for commissioning purposes
Active Loop Displays the active loop - Main
or Override
Main OP Reads the output demand for
the main loop
to adjust
Override OP
Reads the output demand for
the override loop
the
value
Note:
1. The parameter displayed first depends upon other settings.
For example; if controller is in Auto the Target SP is
displayed first; if the controller is in Manual the Target OP is
displayed first.
2. In configuration level it is possible to hide or make individual
parameters read only.
Figure 3-9: Override Loop View
3-16 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00