model 2704 controller installation and operation handbook - Soliton

Module IO
2704 Controller
18.3.4. Triple Logic Output
Table Number:
18.3.4.
This page allows you to set the parameters
for a Logic Output module.
MODULE IO
(Module x(A) Page)
Parameter Name Parameter Description Value Default Access
Level
Ident Logic Output R/O
The following five parameters only appear if the output is configured as ‘Time Proportion’.
Min Pulse Time Minimum relay on or off time Auto = 0.05s
or
0.1 to 999.9
20sec L3
Only
Electrical Lo Electrical low input level O/P range shown
Electrical Hi Electrical high input level O/P range for time
Eng Value Lo Low display reading Disp. range prop.
Eng Value Hi High display reading Disp. range O/Ps
Electrical Val
Module x A Val
The current electrical value
of the output
The current output value
Module x A can be a user
defined name
0.0 or 1.00 R/O
+ 99999
-ve values
are shown
but not used
This module has three outputs. Each output is found under Module 1(A), (B) and (C ).
R/O
18.3.5. Triple Logic and Triple Contact Input
Table Number:
18.3.5.
This page allows you to set the parameters for
a Triple Logic Input module.
MODULE IO
(Module x(A)
Page)
Parameter Name Parameter Description Value Default Access
Level
Ident Logic Input R/O
Module x A Val
The current output value
Module x A can be a user
defined name
This module has three inputs. Each input is found under Module 1(A), (B) and (C ).
0
1
R/O
18-8 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00