model 2704 controller installation and operation handbook - Soliton

The Summary Page
2704 Controller
5. Chapter 5 THE SUMMARY PAGE
5.1. WHAT IS THE SUMMARY PAGE
The Summary Page is a customised page which allows you to view and alter up to 10
parameters in common use in your particular application. It is only available if it has been
customised and turned on in configuration level.
The summary page may be promoted (in configuration level) to be the HOME page. If the
summary page is the HOME page it is shown under the following conditions:-
1. When the controller is switched on
2. When the access mode is changed from configuration level to a different level
3. When and are pressed together (see 3.9)
4. When a timeout (if configured) occurs
5.1.1. To Select The Summary Page
Do This
This Is The Display You
Should See
Reason
1. From any display press
to return to the page
header menu.
2. Press or to
select ‘SUMMARY’
Note: If the Summary
page has not been
enabled in configuration
level, the ‘SUMMARY’
page header is not
displayed
3. Press to view up to
ten parameters which have
been pre-defined in
configuration level
This view shows five
parameters:
PV Loop 1
The value of Dig 1 input
The value of Dig 2 input
Program SP 1
Program Dig 1 Output
5-2 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00