model 2704 controller installation and operation handbook - Soliton

Getting Started 2704 Controller
3.7.2. To Navigate to a Parameter from a Page Header.
Do This
1. From any page press
as many times as
necessary to select the
list of Page Headers
2. Press or to
scroll up or down the list
of page headers.
3. Press to select
the list of Page Sub-
Headers for the
highlighted Page Header.
4. Press or to
scroll up or down the list
of page sub-headers
This Is The Display You Should
See
Press
Press
Additional Notes
The symbol indicates
that the page header is
followed by a list of subheaders.
to return to Page Header
If a page does not
contain a Sub-Header
the display goes directly
to 5 below
to return to Sub- Header
5. Press to select the
list of Parameters in the
highlighted sub-header.
6. Press or to
scroll up or down the list of
parameters.
7. Press to select
the parameter which you
wish to change
8. Press or to
change the value
Press
to return
A flashing bar underlines
the selected parameter.
The parameter can only
be altered if the value is
preceded by !
If the value is read only it
will be replaced by ‘- -‘
for as long as the raise or
lower buttons are
pressed
3-10 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00