model 2704 controller installation and operation handbook - Soliton

2704 Controller Getting Started
3.7.3. To Change Next Parameter in the List
This sections describes how to select further parameters in the list which you may wish to
alter or to view.
Do This
This Is The Display You Should
See
Additional Notes
1. From the previous
display, press to
select the next parameter
which you wish to
change
2. Press or to
change the value
The button will allow
you to scroll down the list.
If this button is held down
it will continuously scroll
around the list, which will
enable you to change a
previous parameter.
3.7.4. To Change Any Parameter in the List
As stated above you can keep pressing or hold down the button to continuously scroll
around the list of parameters. There are two other alternatives. The first is to return to the
highlight bar, described below. The second is ‘Backscroll’ described in the next section.
Do This
1. From the previous
display, press to
highlight the parameter
value and its name.
This Is The Display You Should
See
Additional Notes
2. Press or to
scroll up or down the list.
3.8. BACKSCROLL
In some cases it may be more convenient to scroll back up the list, for example, to select a
new segment number when setting up a program.
A short cut is provided by holding down and pressing or .
Each press of will step back to the previous parameter. Each press of will step
forward to the next parameter.
This function is provided as a short cut and is not necessary to navigate through the
parameters.
Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00 3-11