model 2704 controller installation and operation handbook - Soliton

Loop Set Up
2704 Controller
9.6.3. Override Control Parameters LP1 SETUP (Override Page)
Table Number:
9.6.3.
This list allows you to set up parameters
specific to override controllers
LP1 SETUP
(Override Page)
Parameter Name Parameter Description Value Default Access
Level
OVR Target SP Override target setpoint Display
range
Disable OVR Disable override control No
Yes
Active Loop
Displays the loop which is
controlling at any time
Main Loop
Aux Loop
OVR SP Trim Override loop setpoint trim Range
limit
Main OP Override main output -100 to
100
Override OP Override output -100 to
100
L1
L1
L1
L3
R/O
R/O
9-14 Installation and Operation Handbook. Part No HA026502 Issue 1.0 Apr-00