Jeep Engines - Oljeep

2.5L POWER TECH IN-LINE 4 (FUEL DELIVERY AND FUEL INJECTION SYSTEMS) 839. Connect the brake booster vacuum supply hose.10. Connect the CCV hose and MAP sensor vacuum hoseconnectors to the throttle body.11. Install the power steering pump and bracket assemblyto the water pump and intake manifold. Torque powersteering pump bolts to 28 Nom (21 ft-lbs). Torquebracket to water pump bolts to 47 Nmm (35 ft-lbs).Caution: Ensure that the accessory drive belt is routedcorrectly. Failure to do so can cause the water pump to turnin the opposite direction resulting in engine overheating.(Refer to the proper service manual for correct procedure.)12. Install and tension the accessory drive belt. (Refer tothe proper service manual for correct procedure.)13. Connect the accelerator cable to the bracket and thethrottle lever.14. Connect the speed control and transmission line pressurecable (if equipped) to the bracket and throttle lever.15. Install the air inlet hose and resonator to the throttlebody and the air cleaner.16. Connect the battery negative cable.17. Start the engine and check for leaks.AIR FILTERS~~High Performance Air Filter ElementSpecial reusable filter element for high performance.Increases air flow versus stock filters which increasesengine output.PS2499 18P4876273P4876272Air Filter Cleaning FluidHigh performance air filter element,1986-96 Jeep Wrangler 2.5L only.High performance air filter element,1997-98 Jeep Wrangler 2.5L only.High performance air filter element,1987-96 Jeep Cherokee 2.5L only.Mopar Performance Parts long-life high performance airfilters are reusable. This cleaning fluid is designed toremove dirt to extend the life of the filter.P4529392Air Filter OilAir filter cleaning fluid.Long life, high performance air filters trap dirt with aspecial oil on the filter. After cleaning air filters, re-oilthem with this special fluid.P4529393Air filter oil.