Jeep Engines - Oljeep

424 MOPAR PERFORMANCE PARTSExhaustThe basic exhaust system on all vehicles consists of anexhaust manifold(s), front exhaust pipe, catalytic converter,heat shield(s), muffler and tailpipe.Vehicles with the 360 AMC V-8 use a single muffler exhaustsystem with a single, monolithic-type catalytic converter.The exhaust system must be properly aligned to preventstress, leakage, and body contact. If the system contacts anybody panel, it may amplify objectionable noises originatingfrom the engine or body.When inspecting an exhaust system, critical items toinspect for are cracked or loose joints, stripped screw orbolt threads, corrosion damage, and worn, cracked orbroken hangers. Replace all components that are badlycorroded or damaged. DO NOT attempt to repair. Whenreplacement is required, use original equipment parts (ortheir equivalent). This will assure proper alignment andprovide acceptable exhaust noise levels.All exhaust systems should be checked for leaks. A leak inthe exhaust system is unsafe and will cost you power.SystemCaution: Avoid application of rust prevention compoundsor undercoating materials to exhaust system floor pan heatshields. Light overspray near the edges is permitted.Application of coating will result in cxcessive floor panternperatures and objcctionablc fumes.Intake and Exhaust Manifold Attaching PackagePackage of factory original nuts and bolts to attach intakemanifold and exhaust manifolds. Includes 24 bolts, 24washers, 4 studs and 6 plugs. For 360 AMC V-8 engine only.P4S2968 1Exhaust Manifold Gasket SetIntake and exhaust manifold attachingpackage.This exhaust manifold gasket set can be uscd with castiron manifolds or headers. For 360 AMC V-8 engine only.P4.529632 Exhaust in ani fo I d gasket set .- .. ..