V6 User Manual 1.00.book - Studio General

• When the Force Safe box is checked the Fade Editor forces Fade Safe to enabled after each edit change.• Six Memory Set and six Memory Recall buttons store and recall all the settings in the Fade Editor. Therecall buttons are only numbered when there are stored parameters to recall.• Gain Faders, Nudge buttons and Manual Entry Value Box (in dB) for both Fade Out & Fade In• Intercept and Asymmetry Faders, Nudge buttons and Manual Entry Value Box (in dB)• Length Faders, Nudge buttons and Manual Entry Value Box (in milliseconds. Type an s after any numericentry to obtain a value in seconds) for both Fade Out & In• Length of Fade Out & In can be linked by clicking the Link button• Length of Fade Out and In can be changed symmetrically (centered) by clicking the Mirror button.• Position Faders, Nudge buttons and Manual Entry Value Box (in milliseconds, type an s after any numberentry for a value in seconds) for both Fade Out & In• Position of Fade Out & In can be linked by clicking the Link button• Media Position Faders, Nudge buttons and Manual Entry• Value Box (in millisecond, type an s after any number entry for a value in seconds) for Fade InParameters & Options SectionIn this table parameters and options may be modified by clicking on >.There are these sections and fields:Control• Link Length (see above)• Mirror Length (see above)• Link Position (see above)• Fade Safe (see above)Display• Shown Tracks offers these choices:• All tracks• Follow TimeLine Display• Choice of tracks. The number of tracks selected in the TimeLine controls the available choices. So, if4 tracks are selected, there will be the option of 1, 2, 3, or 4 tracks• Auto-Center, enables automatic re-centering of the display around the Fade or Reference Point after certainoperations• None• Fade• Reference Point• Zoom, can be one of the following:• Free, follows only Zoom Reset, In and Out• Auto-Zoom, automatically Zooms around the current Fade after some operations• Auto-Zoom / Free, automatically Zooms around the current Fade but only when it enters the FadeEditor, thereafter, the Zoom is Free• Timeline, follows the Timeline Zoom factor• Choice of User defined Zoom Presets (see menu View > Zoom)Fade Editor : Parameters & Options Section 9 - 140