V6 User Manual 1.00.book - Studio General

Multiple tracksYou can also delete all tracks from the selected track to the last (highest number) by selecting Delete to Lastinstead of Delete.You can also right-click in the Track Header to add or delete Tracks.Routing Tracks to / from the MixerWhen you create a Mixer, Pyramix will automatically create the same number of Tracks as Mixer Input Strips(channels).If Connect automatically as many inputs and outputs as possible is checked, Pyramix will attempt to automaticallyroute the output of each Track to a corresponding Mixer channel input, so that Track 1 output routes toMixer channel 1 input, Track 2 to Mixer channel 2, etc.Similarly, Pyramix will attempt to automatically route each Mixer channel output to a corresponding Track input,so that Mixer channel 1 output routes to Track 1 input, Mixer channel 2 to Track 2, etc.These default Track I/O assignments can easily be changed by the user. See also: Adding Strips on page 181Track Header PanelThe Track Header Panel contains a number of buttons and information fields.This screen shot shows Track Headers in variety of states.Track Header PanelIn each Track Header, you will find a pale green box with a number (and assignment Tag where applicable)superimposed on it; and a pale red box with a number superimposed on it. The pale green box shows the mixerchannel number (and Tag if applicable) the Track output is assigned to. The pale red box shows the number ofthe physical input or Internal Return Bus feeding the mixer channel and routed to the Track input.To change a Track Input or Output assignment, just click on the corresponding Track input or output box, thenselect the appropriate Mixer channel or Input number from the corresponding pop-up list. Note: changing anTracks and Track Groups : Routing Tracks to / from the Mixer 5 - 74