V6 User Manual 1.00.book - Studio General

Playlist popup menuPlease see: Playlists on page 124Track Record ModesEach Track has a tri-state Record Ready toggle button, located to the left of the Track itself in the Track Informationand Setup Area.Tip: Right-clicking on a track arming button opens the Settings > All Settings window immediately on theProject > Record page.PlayThe Green Dot in the Track Header indicates Record Safe mode, the default when Tracks are newly created.When in this state, the Track cannot be recorded to.Record Ready (Manual)Click on the Green Dot once to toggle to Record Ready mode. This is indicated by the dot turning into the RedDot. The Track will now go into Record mode immediately when the Master Record button is pressed in theTransport Strip or Transport window.Record Punch In (Auto)Alt-Click on the Red Dot to toggle to Record Punch In mode. This is indicated by a Red Dot flanked by 2 redvertical lines. In this mode, when the Master Record button is pressed in the Transport Strip or Transport window,the Track will stay in Play mode until the current Mark In point is reached, then the Track will go intoRecord mode. It will stay in Record mode until the current Mark Out point is reached.Tracks and Track Groups : Track Record Modes 5 - 77