V6 User Manual 1.00.book - Studio General

Only available when Dubbing Mode is selected in the adjacent check box. A check in this box means that anychanges to track arming made whilst recording must be confirmed by a new Record command before they willtake effect.Media optionOne file per trackWhen checked, each recording on each track of a multi-track recording is recorded into a separate file. When thisoption is off (which is the default), one single media file is created containing all the tracks.Flatten track numbersWhen a recording is made on a track, Pyramix always adds media number to it. When checked on (default), Pyramixstarts enumerating at one. E.g. If a recording is made on tracks 5 and 9 of a multitrack session simultaneously,the media numbers will be 1 and 2. When this option is off, Pyramix adds the real track numbers to the media. Inthe example above, this would be 5 and 9.Unique filename extensionWhen checked, Pyramix will append a random number to the name of each new recording in order to avoid duplicatefile names.Quiet if creation failedUnless this box is checked, Pyramix displays a dialog with an error message when the creation of a media file fails.This can be annoying if Pyramix is remotely controlled. Checking the box suppresses the error message.Post ProcessingThese options determine what Pyramix will do after each recording is finished.Prompt for name after recordingWhen checked, a Record Name dialog box will open immediately after recording is finished and playback of Pyramixis stopped.If a name was entered in the Take Name field (see above) it will automatically appear in the Record Name dialogbox when it opens. You can edit the existing name, or replace it completely with a new name.Keep in default libraryWhen checked, new recordings will automatically appear in the Default library of the current Project.Increment take numberWhen checked, each successive recording will have the name in the Take Name field applied to it, plus a numberthat will increment with each new recording. E.g, if the first recording is named "Take", the next recording willautomatically be named "Take 2", etc.Place on new tracksWhen checked, Pyramix will place the newly recorded clips on new tracks. These new tracks will be added to theProject Editor as soon as playback is stopped following a punch in/punch out recording. When first created, thesetracks are not assigned to mixer channels, so it will be necessary to assign them when you want to output them. Ifthis item is not checked, the new clips will be placed on the track(s) set to record them.Clean up Media after recordingRecord Name dialog boxNote: This option is automatically set OFF when a Project is opened.Settings : Project 27 - 511