11.07.2015 Views

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

V6 User Manual 1.00.book - Studio General

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Inverse switchSwitches the between normal and inverse expander modes.Output levelExpander normal modeOutput levelInverse modeThresholdInput levelThresholdInput levelExpander normal and Inverse mode actionAttack/Release/Hold controlsThe Expander Section uses the settings of the Attack/Release/Hold controls in the Dynamics Section to controlit’s timing.Equalizer sectionA fully parametric five band equalizer. Each band covers the entire frequency range from 20 Hz to 20 kHz (orhigher, depending on the sampling rate of the project) and can be switched between peaking, high or low shelvingand low-pass or high-pass characteristics. Each of the five bands can be switched off. De-activated bands donot consume DSP power.EQ Section On/OffShow/Hide EQ SectionPre-Dynamics SwitchBand SelectorBand Filter TypeGain ControlGraphic Display WindowSelected Band On/OffQ (Bandwidth) ControlFrequency ControlShow/ Hide EQ SectionEQ section on/offPre Dynamics SwitchThis switch offers the option to the switch the EQ before the dynamics section. By default the EQ is after thedynamics section.Graphic Display WindowStrip and Bus Tools : Strip and Bus Tools 15 - 281

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!