V6 User Manual 1.00.book - Studio General

Single RowSingle row is useful if you only wish to display buses and or Externals (returns).Meter Bridge - Single Row ModeStripsThe red button shows/hides the Input Strip Meters (default is Show)Note: Show/Hide for Input Strips is only available in ‘single row’ display mode. Useful inapplications where the Bus and External Machines are of more interest than the Inputs.Pre-FaderWhen lit, the Input Meters source is taken pre-fader. (default is post-fader)AutomationWhen lit, four Fader Automation Mode indicators are shown in each Input Strip. (default is hidden)Auto-select Active StripWhen lit, the active strip is highlighted in yellowBusesThe red button shows/hides the Bus Strip Meters (default is Show)Pre-FaderWhen lit, the Buses Meters source is taken pre-fader. (default is post-fader)ExternalsThe red button shows/hides the External Machines Meters (default is Show)Note: Externals, External machine Returns, are set up in the Monitor : Externals page.Please see: External Inputs on page 205Meters ZoomThe slider adjusts the meter scaling. Range is from 0dB to -144.5dB maximum to 0dB to -10dB minimum. Doubleclickingon the slider ‘knob’ resets to default scaling.Meter Bridge : Meter Bridge 12 - 218