V6 User Manual 1.00.book - Studio General

Then click on the Metronome Settings...buttonChoose a console strip for the Metronome sound from the drop-down list.Metronome Settings dialogAny audio file can be used, for the Bars, Beats and Grid sounds. By default, some suitable WAV files are installedwith Pyramix in the same location where you installed the Pyramix software. By default. this will be:C:\Program Files\Merging Technologies\Pyramix Virtual Studio\Metronome Bars.wav etc.The Attack Offset parameters enable the timing to be adjusted and the values in the Level data input fieldsdetermine the playback levels of the chosen sounds.Midi Files Import / ExportLoadSaveBoth buttons open a Browser Window to enable navigation to a file to load or a location to save to.Currently, when midi files of type 2 are imported, only the tempo map and signature of track 1 isimported.Reconforming to Original Media from Avid &/or OMFThere are no specific rules for the detailed settings of the procedure described below. It may change from user touser, project to project, etc… It really is up to the user to define a specific workflow including naming of the originalrecording, importing the stereo/original version into the Avid and making sure that the Video Editor properlyApplications : Reconforming to Original Media from Avid &/or OMF 19 - 345