V6 User Manual 1.00.book - Studio General

where no previous pass exists. This occurs either immediately if the control onlyhas two states (e.g. a button) or over a period of time if the control is a fader orknob. The time period is determined by the value entered in the Release Time boxin ms.Refresh RateThe Quick 10[ms] Slow 100[ms] slider allows the Refresh rate to be changed. (Or type a value in the box.) TheRefresh Rate setting determines the rate at which the automation data is recorded. By default the refresh rate isthe same as the actual time code frame rate, e.g. 40 ms at a frame rate of 25 fps.The possible range of the refresh rate is 10 to 100 milliseconds. Please note that the setting is rounded to entireframes, so that the effective refresh rate will be either one, two or three times the actual frame rate.One reason to choose a slower setting for the refresh rate would be to save the processing power required to calculatethe automation movements in case of complex mixes.Note: This setting has no bearing on “smoothness” of dynamic automation changes.Pyramix uses linear interpolation to avoid any possibility of zipper noise.Time StretchTimeZone SettingsPresetAll Settings Application Time Stretch Timezone Settings PageThe drop-down list offers a choice of algorithm presets for various sound types.Settings : Time Stretch 27 - 536