V6 User Manual 1.00.book - Studio General

Wordlength MeterThe Wordlength Meter (or Bit Meter) allows you to view the effective wordlength of a signal.Wordlength Meter floating WindowBear in mind that, once you apply any gain adjustment (e.g. a fader set anywhere other than 0dB) the signal willbecome 32 bit float data.Effects and Plug-in AutomationEffects SnapshotsAll signal processing parameters in Pyramix VS3 Effects Plug-ins can be fully automated dynamically in the samemanner as the Mixer controls. Please see Dynamic Automation Modes on page 264.Note: For information about differences when automating VST Plug-ins Please see: VSTPlug-in Automation on page 258Effect Settings can be easily stored and recalled by dragging them to/from libraries.Creating Effects SnapshotsHold Alt + Shift, then click and drag from the horizontal bar next to the Channel combo box in a Plug-in windowto the library where you want to store the settings, then release. A new item, of the type Mixer Snapshot, is storedin the library. The snapshot is given the name of the plug-in by default. The new item is automatically highlightedso, if you wish to change the default name, simply type the new name and hit Enter to confirm. The name of thesnapshot can be subsequently changed by clicking on the name in the library, then entering the new name.Note: In some plug-ins Alt + Shift click and drag will work on any of the horizontal sectiontitle bars and in others from anywhere on the plug-in window where the cursorchanges to .Using Effects SnapshotsSimply click and drag a snapshot from a user library to a plug-in of the same type as the original and release anywhereon the surface where the cursor changes toAnywhere the snapshot cannot be dropped, or if the snapshot plug-in type does not match the target plug-in, thecursor changes toOptional Plug-insOptional Pyramix plug-ins. For operating instructions please see each plug-in’s guide.Effects and Plug-Ins : Wordlength Meter 13 - 245