V6 User Manual 1.00.book - Studio General

This is the size of the buffer used while recording new data.Reset to FactoryThis button restores all the values to their factory default.ADAT Daughterboard and XDTDMThe ADAT daughter card, despite the fact that its original design dates back to 1999, is still fully supported in PyramixV6.1 in legacy HDTDM mode (64 I/O channels)However, the use of this daughter card in XDTDM mode (128 I/O channels) is not guaranteed without the upgradedescribed below. The much higher transmission frequencies, employed in order to convey double the number ofaudio channels over the XDTDM bus, require an improved ground plane, which is achieved with an additional conductiveshield:• To work properly in XDTDM mode, the ADAT daughter card has to be retrofitted with a shield, tightlyscrewed to the card in order to ensure proper grounding. Should you have an ADAT card, not yet retrofittedwith a Shield, that you wish to use in XDTDM Mode, please contact your Merging Sales Partner.Note: In XDTDM mode, the ADAT daughterboard will only support 8 output channelsthrough optical output A, duplicated through optical output B. ADAT inputs are nolonger available in the XDTDM mode.Troubleshooting : ADAT Daughterboard and XDTDM 28 - 556